Using the Bria Push Service with Bria Mobile is easy - most users will only need to enable the "Use Push Notification" setting in their Account > "Account Specific Features" section.
A complete reference to the settings and device/server requirements can be found here:
Bria Enterprise users will not see these settings, as they are controlled through the Stretto Provisioning.
Server Address List
If your network has a restrictive firewall, ensure that you allow access to the following addresses.
Domain Names | IP Addresses |
https://push.softphone.com | 216.93.246.120 |
https://push-as.softphone.com | 35.185.177.49 |
https://push-as3.softphone.com | 35.240.151.194 |
https://push-au.softphone.com | 35.189.7.217 |
https://push-au2.softphone.com | 35.244.85.149 |
https://push-eu.softphone.com | 35.195.163.239 |
https://push-eu2.softphone.com | 34.89.45.1 |
https://push-ue.softphone.com | 216.93.246.120 |
https://push-ue3.softphone.com | 35.230.185.25 |
https://push-uw.softphone.com | 35.197.16.246 |
https://push-uw3.softphone.com | 35.247.85.64 |
https://push-uc.softphone.com | 35.239.221.102 |
https://push-za.softphone.com | 102.133.161.81 |
https://push-jp.softphone.com | 104.198.91.17 |
wss://push-uc1.softphone.com | 35.193.78.38 |
wss://push1.softphone.com | 216.93.246.121 |
wss://push2.softphone.com | 216.93.246.122 |
wss://push-as1.softphone.com | 35.187.236.29 |
wss://push-as3ws.softphone.com | 35.247.187.184 |
wss://push-au1.softphone.com | 35.189.10.177 |
wss://push-au2ws.softphone.com | 35.244.75.9 |
wss://push-eu1.softphone.com | 35.195.65.27 |
wss://push-eu2ws.softphone.com | 34.89.19.0 |
wss://push-ue3ws.softphone.com | 35.199.2.199 |
wss://push-uw1.softphone.com | 35.197.115.127 |
wss://push-uw3ws.softphone.com | 35.227.171.146 |
wss://push-za1.softphone.com | 102.133.163.77 |
wss://push-jpws.softphone.com | 34.84.10.191 |
Clients should automatically route to the correct nearest regional server, but we recommend ensuring that ALL addresses are accessible in case of traveling users, etc.
Please also note that IP addresses may change in the future; if you manually configure your firewall/etc. for these addresses and experience issues in the future, please revisit this page to find the latest information.
Current limitations:
- Only IPv4 SIP servers are currently supported for calls involving the push server. The Bria mobile client will support IPv6-only networks utilizing DNS64/NAT64 when communicating with IPv4 SIP servers.